Matrix-orbital GLC24064 Manuel d'utilisateur télécharger pdf (Page 16)

2.2.3 I

C Communications

The display has I

C communications running at 100 Kbps and up to 127 units can exist on a single

communications line. The display I

C communication lines are the two middle pins of the power connector.

These are shared with RS-232 and must be turned on. The default I

C address is 0x50. The I

C data line

operates on 5 volts.

Figure 16: Power Connector

Table 6: Connector Pinout

Pin 4 Ground

Pin 3 SDA (I

C data)

Pin 2 SCL (I

C clock)

Pin 1 Vdc

The display does not work on I

C by default. The modiﬁcation shown in the Figure below must be

carried out.

Figure 17: I

C communication runs at 100 Kbps and supports up to 127 units on a single communications line. The

C data line operates on 5V CMOS levels.

Matrix Orbital GLC24064 12

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Pas de commentaire

Matrix-orbital GLC24064 Manuel d'utilisateur Page 16