Matrix-orbital LK202-24-USB Manuel d'utilisateur télécharger pdf (Page 6)

Figure 1: Connections for Testing

NOTE The keypad is not used to directly control any aspect of the operation of the

display. The display acts simply as a matrix to serial converter.

1.4 Setup for Testing

Before setting up the application, it is best to test out the display. This is easily done with a PC.

The following is a list of requirements for testing;

• An available powered USB source

• USB Drivers which can be located on Matrix Orbital’s website and eCD

• Test software such as Alpha Demo or Display Tuner

Once the above test requirements have been met, the user may proceed with the following steps;

1. Refer to the diagram above for the following steps.

2. Download or copy the USB drivers into a directory.

3. Uncompress the ﬁles. They will be a self extracting ZIP ﬁle.

4. Connect the USB cable to the display and the computer.

5. Windows will give a prompt for drivers for a USB ⇔ Serial Device.

6. Select “Specify location”, and navigate to the directory the ﬁle was uncompressed to.

7. Test the display.

1.5 Trying out the LK202-24-USB

The unit should be plugged into the USB and the backlight and custom start up screen should come on.

Matrix Orbital LK202-24-USB 2

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Pas de commentaire

Matrix-orbital LK202-24-USB Manuel d'utilisateur Page 6